CONTACT US (574) 772-6673 - Sales Ext. 223, Parts Ext. 001, Service Ext. 308

(574) 772-6673 - Sales Ext. 223, Parts Ext. 001, Service Ext. 308


Kruz® Ravens “RB”



Constructed from high strength aluminum alloys, Ravens ‘RB’ by Kruz is built without the bulk, improving your payload capacity.

Ravens ‘RB’ by Kruz frameless dump trailers — with their distinctive swirl finish — are availabe at dealers from coast to coast.

High Strength, Heavy-Duty, Aluminum Performance

Standard Heavy Duty Body Saddles
Optional Front Fenders
Side Reinforcing Angle And Standard Rear Splash Guard With Flap
Standard Rear Ladder; Optional door
Rear Floor Sill  8” wide x 4” deep extruded aluminum (6061-T6) with 1/2” lip to secure seal for gate
Floor .312 aluminum plate (5083)
Sides .190 aluminum plate (5083) with 3/8″ side stiffener angle
Rear Post Extruded aluminum (6061-T6), 8″ wide x 4” deep
Top Rail  Extruded aluminum (6061-T6), 10” x 4” Front- .230 aluminum (5083). Steps on rear roadside, ladder type.
Hoist Box  Sloped, open with reinforcements for body saddles
Tailgate  .190 aluminum (5083) with extruded dirt shedder braces (6061-T6). Heavy-duty steel bolt-on hardware. Overslung latches provide positive locking. Air operated controls are located on draftarm roadside behind landing gear. Sealed tailgate around outside edge of gate.
Electrical  LED lights recessed in side stiffener. Mid turn signal optional; center marker light STD. One light each side on rear post facing rear; 4” LED STT in frame
Mud Flaps  Heavy-duty spray suppressant back rubber
Finish  Trademarked swirl. Steel parts painted black. Conspicuity tape.
Lengths  24-40′
Tires 11R24.5 14ply STD
Wheels/Disc  Eight (8) 8.25 x 24.5”, 10-hole disk, hub piloted, unimount, machine finish aluminum wheels.
Hubs  Four (4)10-stud Duralite, hub piloted.
Drums  Outboard mount light-weight hub piloted.
Brakes  16-1/2″ x 7″ Q-plus, non-asbestos lining with quick-changes features, automatic slack adjustors, Meritor WABSO 4S/2M ABS system
Axles  Two tubular 5” 25,000 lb capacity, 71-1/2″ track.
Suspension  30,000# capacity, air ride, closed tandem, 49” axle spacing.
Bogie Frame  312 Aluminum web; bottom flange 5” wide x 3/4” thick.
Draft Arms  Aluminum 4” x 6” tube with round tubular crossmember. Draft arms are hinged to upper coupler and outboard of body.
Landing Gear  Stiff legs or optional two-speed 50,000-Ib capacity with sand shoes, handle mounted roadside.
King Pin Plate  37″ x46″ x 5/16″ steel articulating 5th wheel plate; 18” King Pin Setting
Hoist Base  Four 6” x 32″ x 1/2″ steel plate support with 2” hoist pin
Hoist  Five stage, heavy duty
Electrical  DOT, LED and harness
Finish  Swirl-finished aluminum suspension frame. All steel parts painted black enamel.
Scroll to Top