DUMP BODY
Kruz® Steel Dump Bodies
Steel Dump Body by Kruz
High-Strength, Abrasive Resistant Heavy-Duty Steel Performance
Kruz offers you extraordinary strength-to-weight ratios; bringing computer aided design and high-strength steel alloy construction for dump truck body performance.
Kruz dump bodies are an investment in higher legal payload, longer product life, lower maintenance and better resale value.
The Features You Need
- Lengths to 24 feet
- Flat front standard, notched front optional
- Crossmember-less with heavy duty long sill
- and extruded rubber chassis cushion
- Complete body and hoist mounting kits available
- AR 450 Abrasive Resistant Steel
The Options You Want
- 1/4-5/16-3/8-inch floor full length
- Splash guards front of tandem
- Spreader chains
- Coal chute
- Sloped tailgate
- Rear apron
- Cab shields half or full
Body Diagram & Specs
| A | LENGTHS FROM 12’ TO 20’ |
| B | SIDE HEIGHTS FROM 48” TO 72″ |
| C | FRONT POST HEIGHT FROM 48” TO 72” |
| D | TAILGATE HEIGHT FROM 48” TO 72” |
| E | MINIMUM OVERHANG IS 6” |
| F | CAB HEIGHT |
| G | CAB TO SUSPENSION CENTER LINE |
| H | BACK OF CAB TO REAR OF TIRE |
| J | SPREADER PAN: NONE IS STD |
| K | CAB SHIELD: NONE IS STD |
| L | OVERALL LENGTH |
| M | OVERALL HEIGHT |
| N | CAB SHIELD HEIGHT |
| P | FRONT CAB SHIELD HEIGHT DIMENSION |
| Q | TAILGATE THICKNESS 4MM |
| R | MINIMUM CAB CLEARANCE 3.00 |
| S | OVERALL WIDTH 95.5” STD |
| T | INSIDE WIDTH 87.5” |
| WB | WHEELBASE |
| HOIST: CUSTOM OR PARKER HANNIFIN | |
| CUBIC YARD CAPACITY: 12 TO 30 |
TOP RAIL: 3/16” wall – 4″ Square Steel Tube
SIDES: .4mm Abrasive Resistant Steel with Radius inside Corners: Heights from 42″to 72″. optional thickness available Full Length Body Fenders
FLOOR: .3/16 Abrasive Resistant Steel Crossmember-less with Heavy duty long sills and rubber chassis cushion. Optional thickness available
LONGITUDINALS: Fabricated with extended floor support
REAR POST: 15″ wide x 4″ deep x 3/16” formed
MUDFLAPS: Kruz heavy-duty spray-suppressant black rubber
FRONT: 3/16” Abrasive Resistant Steel:Height between 42″ and 96″, Steps on roadside outside
REAR FLOOR SILL: 8″ wide x 4″ deep
TAILGATE: 3/16” Abrasive Resistant Steel with dirt shredder braces; heavy-duty hardware. Over-center latches provide positive-locking air-operated control, including air tailgate mounting kit; rear height from 42″ to 72″, Spreader Apron: Optional
ELECTRICAL: LED lights STD. One on front and rear posts. One light on the rear post facing rear, each side. STT lights in rear posts.
